Water use and discharge records for construction projects.
EnviroTrack records water use on construction sites from meter reads, splits potable from recycled and captured water, and keeps every dewatering and discharge record with the event it covers. Your water figures for ESG reporting and your environmental compliance record come from the same data.
How it works.
Source on Every Entry
Each entry is marked meter reading, invoice or estimate, and an estimate carries its calculation.
Potable and Non-Potable
Mains and treated water are potable. Surface water, groundwater, recycled water and rainwater are non-potable.
What It Was Used For
Dust suppression and compaction, offices and sheds, washdown, or another use you describe.
Kilolitres Throughout
Water is reported and stored in kilolitres, and shown as reported, with no conversion.
Source Share Targets
Set a target for the share of water drawn from the sources you choose, such as non-potable.
Never Costed as Carbon
Water has no emission factor, so it is reported without adding to your emissions.
Read the meter. Record the source.
A package adds an entry for each meter reading, invoice or estimate, with its location, the source it drew from and the quantity in kilolitres.
- An estimate needs its calculation, up to 1,000 characters
- An attached invoice with no source chosen counts as Invoice
- A use of Other needs a description
Know how much came from the mains.
The Water Usage tab splits withdrawal into potable and non-potable, and charts each source: mains, groundwater, surface water, recycled water and rainwater.
- Total Water Withdrawn adds both kinds
- Each kind shows its share of withdrawal
- Monthly figures in kilolitres, with a running total
Targets for less water, and for better water.
A water target can cut use against a baseline, such as 10% below it, or set the share drawn from the sources you choose, such as 33% from non-potable sources.
- Baseline to target writes the whole rule on screen
- Source share counts the categories you pick
- Every water entry is in the base of a source share
Every source a site draws from.
Switch on the water sources your project reports and give each package the ones it uses. Each source sits under potable or non-potable, never both.
Data Source
- Meter Reading, Invoice or Estimate
- An Estimate Shows Its Calculation
- An Attached File Counts as Invoice
Where
- A Location on Every Entry
- Against the Package That Used It
- Several Entries a Month if Needed
Water and Carbon
- No Water Emission Factor
- Reported in Kilolitres
- Never Added to Emissions
Water figures with their source attached.
Clients ask how much water a project drew, and from where. Catchment keeps every entry with its source, its location and whether it was metered, invoiced or estimated.
Metered, Invoiced or Estimated
Chosen on every entry, with an estimate’s calculation kept.
Potable Kept Apart
Mains water is reported apart from recycled water and rainwater.
Counted Once Accepted
Only accepted sections reach the water charts and targets.
Compared Across Projects
Water use by project, against the organisation average.
Why it matters.
Water reporting covers more than volume: potable use, recycled share, and discharge events that carry licence conditions. Catchment records volumes from on-site meter reads, tracks recycled and captured water separately from potable, and keeps dewatering and discharge records attached to the events they cover. When a client asks, the record is already assembled.
Site Teams
Record meter reads and discharge events as they happen.
Environmental Managers
Keep discharge records with the events they cover.
Clients
See monthly volumes by source and use.
Water, in practice.
What water is tracked?+
Water drawn from third party sources such as mains, produced water, surface water, groundwater, recycled water and rainwater, each reported in kilolitres.
Where does the data come from?+
Each package reports its own entries every month, each marked meter reading, invoice or estimate. An estimate must show its calculation.
What counts as non-potable?+
Surface water, groundwater, recycled water from an onsite or offsite fill source, and rainwater. Mains water and treated produced water count as potable.
Can we set reuse targets?+
Yes. A source share target measures the share of water drawn from the sources you choose, such as non-potable. A reduction target can also cut use against a baseline.
Does water count towards emissions?+
No. There is no water emission factor, so water is reported in kilolitres and never adds to your emissions.
Can we record what the water was used for?+
Yes. An entry can say dust suppression and compaction, offices and sheds, washdown, or another use, which then needs a description.
Can we compare water use across projects?+
Yes. The organisation view adds water across your projects, splits it by package type, and shows each project against the organisation average.